BGP Redist Rules Tab

•	Network > Virtual Router > BGP > Redist Rules

Configure the settings described in the following table to create rules for redistributing BGP routes.

BGP Redistribution Rules Settings	Configure In	Description
Allow Redistribute Default Route	BGP > Redist Rules	Permits the firewall to redistribute its default route to BGP peers.
Name		Add an IP subnet or create a redistribution rule first.
Enable		Select to enable this redistribution rule.
Route Table		Specify which route table the route will be redistributed into: unicast, multicast, or both.
Metric		Enter a metric in the range 1-65,535.
Set Origin		Select the origin for the redistributed route (igp, egp, or incomplete). The value incomplete indicates a connected route.
Set MED		Enter a MED for the redistributed route in the range 0-4,294,967,295.
Set Local Preference		Enter a local preference for the redistributed route in the range 0-4,294,967,295.
Set AS Path Limit		Enter an AS path limit for the redistributed route in the range 1-255.
Set Community		Select or enter a 32-bit value in decimal or hexadecimal or in AS:VAL format; AS and VAL are each in the range 0-65,535. Enter a maximum of 10 communities.
Set Extended Community		Enter a 64-bit value in hexadecimal or in TYPE:AS:VAL or TYPE:IP:VAL format. TYPE is 16 bits; AS or IP is 16 bits; VAL is 32 bits. Enter a maximum of five extended communities.

Parent topic 

BGP