Device > Setup > DLP

•	Device > Setup > DLP

Configure the network settings for files scanned to the Enterprise Data Loss Prevention (DLP) cloud service.

Field	Description
Max Latency (sec)	Specify the maximum latency in seconds (between 1 and 240) for a file upload before an action is taken by the firewall. Default is 60.
Action on Max Latency	Specify the action the firewall takes when a file upload latency reaches the configured Max Latency. • Allow (default)— Firewall allows a file upload to continue to the DLP cloud service when the maximum latency is reached. • Block—Firewall blocks a file upload to the DLP cloud service that reaches the configured maximum latency.
Max File Size (MB)	Enforce a maximum file size (between 1 and 20) for upload to the DLP cloud service. Default is 20.
Action on Max File Size	Specify the action the firewall takes when a file upload reaches the configured Max File Sized. • Allow (default)— Firewall allows a file upload to continue to the DLP cloud service if the file is the configured maximum file size. • Block—Firewall blocks a file upload to the DLP cloud service if the file is the configured maximum file size.
Log Files Not Scanned	Check (enable) to generate an alert in the data filtering log when a file could not be uploaded to the DLP cloud service.
Action on any Error	Specify the action the firewall takes when an error is encountered during a file upload to the DLP cloud service. • Allow (default)— Firewall allows a file upload to continue to the DLP cloud service if an error is encountered during upload. • Block—Firewall blocks a file upload to the DLP cloud service if an error is encountered during upload.

Parent topic 

Device