GlobalProtect Portals Authentication Configuration Tab

•	Network > GlobalProtect > Portals > <portal-config> > Authentication

Select the Authentication tab to configure the various GlobalProtect™ portal settings:

•	An SSL/TLS service profile that the portal and servers use for authentication. The service profile is independent of the other settings in Authentication.

•	Unique authentication schemes that are based primarily on the operating system of the user endpoints and secondarily on an optional authentication profile.

•	(Optional) A Certificate Profile, which enables GlobalProtect to use a specific certificate profile for authenticating the user. The certificate from the client must match the certificate profile (if client certificates are part of the security scheme).

GlobalProtect Portal Authentication Settings	Description
Server Authentication
SSL/TLS Service Profile	Select an existing SSL/TLS Service profile. The profile specifies a certificate and the allowed protocols for securing traffic on the management interface. The Common Name (CN) and, if applicable, the Subject Alternative Name (SAN) fields of the certificate associated with the profile must match the IP address or FQDN of the Interface selected in the General tab. Fastpath:  In GlobalProtect VPN configurations, use a profile associated with a certificate from a trusted third-party CA or a certificate that your internal enterprise CA generated.
Client Authentication
Name	Enter a name to identify the client authentication configuration. (The client authentication configuration is independent of the SSL/TLS service profile.) You can create multiple client authentication configurations and differentiate them by operating system. For example, you can add one unique authentication profile for Windows endpoints and another authentication profile for macOS endpoints. Note:  Although you can add multiple client authentication configurations for the same OS, the firewall always selects the authentication profile at the top of the list to authenticate all users using that specific OS. You can also create configurations that GlobalProtect deploys to apps in Pre-logon mode (before the user has logged in to the system) or that it applies to any user. (Pre-logon establishes a VPN tunnel to a GlobalProtect gateway before the user logs in to GlobalProtect.)
OS	To deploy a client authentication profile specific to the operating system (OS) on an endpoint, Add the OS (Any, Android, Chrome, iOS, Linux, Mac, Windows, or WindowsUWP). The OS is the primary differentiator between configurations. (See Authentication Profile for further differentiation.) The additional options of Browser and Satellite enable you to specify the authentication profile to use for specific scenarios. Select Browser to specify the authentication profile to use to authenticate a user accessing the portal from a web browser with the intent of downloading the GlobalProtect app (Windows and Mac). Select Satellite to specify the authentication profile to use to authenticate the satellite (LSVPN).
Authentication Profile	In addition to distinguishing a client authentication configuration by an OS, you can further differentiate by specifying an authentication profile. (You can create a New Authentication Profile or select an existing one.) To configure multiple authentication options for an OS, you can create multiple client authentication profiles. Note:  If you are configuring an LSVPN in Gateways, you cannot save that configuration unless you select an authentication profile here. Also, if you plan to use serial numbers to authenticate satellites, the portal must have an authentication profile available when it cannot locate or validate a firewall serial number. See also Device > Authentication Profile.
Username Label	Specify a custom username label for GlobalProtect portal login. For example, Username (only) or Email Address (username@domain).
Password Label	Specify a custom password label for GlobalProtect portal login. For example, Password (Turkish) or Passcode (for two-factor, token-based authentication).
Authentication Message	To help end users know the type of credentials they need for logging in, enter a message or keep the default message. The maximum length of the message is 256 characters.
Allow Authentication with User Credentials OR Client Certificate	If you select No, users must authenticate to the gateway using both user credentials and client certificates. If you select Yes, users can authenticate to the gateway using either user credentials or client certificates.
Certificate Profile
Certificate Profile	(Optional) Select the Certificate Profile the portal uses to match those client certificates that come from user endpoints. With a Certificate Profile, the portal authenticates the user only if the certificate from the client matches this profile. If you set the Allow Authentication with User Credentials OR Client Certificate option to No, you must select a Certificate Profile. If you set the Allow Authentication with User Credentials OR Client Certificate option to Yes, the Certificate Profile is optional. The certificate profile is independent of the OS. Also, this profile is active even if you enable Authentication Override, which overrides the Authentication Profile to allow authentication using encrypted cookies.

Parent topic 

Network > GlobalProtect > Portals