Log Card Subinterface

•	Network > Interfaces > Ethernet

To add a Log Card Interface, select the row for that interface, Add Subinterface, and specify the following information.

Log Card Subinterface Settings	Configured In	Description
Interface Name	LPC Subinterface	Interface Name (read-only) displays the name of the log card interface you selected. In the adjacent field, enter a numeric suffix (1-9,999) to identify the subinterface.
Comment		Enter an optional description for the interface.
Tag		Enter the VLAN Tag (0-4,094) for the subinterface. Fastpath:  Make the tag the same as the subinterface number for ease of use.
Virtual System	LPC Subinterface > Config	Select the virtual system (vsys) to which the Log Processing Card (LPC) subinterface is assigned. Alternatively, you can click Virtual Systems to add a new vsys. Once an LPC subinterface is assigned to a vsys, that interface is used as the source interface for all services that forward logs (syslog, email, SNMP) from the log card.
IPv4	Ethernet Interface > Log Card Forwarding	If your network uses IPv4, define the following: • IP address—The IPv4 address of the port. • Netmask—The network mask for the IPv4 address of the port. • Default Gateway—The IPv4 address of the default gateway for the port.
IPv6		If your network uses IPv6, define the following: • IP address—The IPv6 address of the port. • Default Gateway—The IPv6 address of the default gateway for the port.

Parent topic 

Network > Interfaces