RIP

•	Network > Virtual Routers > RIP

Configuring the Routing Information Protocol (RIP) includes the following general settings:

RIP Settings	Description
Enable	Select to enable RIP.
Reject Default Route	(Recommended) Select if you do not want to learn any default routes through RIP.
BFD	To enable Bidirectional Forwarding Detection (BFD) for RIP globally for the virtual router on a PA-400 Seres, PA-3200 Series, PA-3400 Series, PA-5200 Series, PA-5400 Series, PA-7000 Series, and VM-Series firewall, select one of the following: • default (profile with the default BFD settings) • a BFD profile that you have created on the firewall • New BFD Profile to create a new BFD profile Select None (Disable BFD) to disable BFD for all RIP interfaces on the virtual router; you cannot enable BFD for a single RIP interface.

In addition, RIP settings on the following tabs must be configured:

•	Interfaces: See RIP Interfaces Tab.

•	Timers: See RIP Timers Tab.

•	Auth Profiles: See RIP Auth Profiles Tab.

•	Export Rules: See RIP Export Rules Tab.

Parent topic 

Network > Virtual Routers